Produkty dla tester baterii (6)

On the basis of its well proven concept of production line QC Testers, ATEQ has developed a new leak tester designed for the specific requirements of high volume production of plastic parts. This instrument is used for the detection of localized moulding faults, insufficient membrane thickness, perforations, etc. This instrument has also proven to be effective on testing pouch battery cells. The IONIQ is based on discharge current measurement and is able to detect defects up to of 10µm. Battery pouch cells, plastic bottle caps, plastic packaging, plastic coveringsThe IONIQ measures the current flowing between a patented charged probe and a ground plate placed under the part to be tested. The IONIQ uses the % of the nominal voltage (which reflects the discharge current), measured on the part as PASS/FAIL level. In a PASS situation (fig 1) : No hole, no weak part, the IONIQ measures a high %. The measured voltage and the nominal voltage are virtually equal. Operating:+ 10°C at + 45°C Storage:0°C at + 60°C Single phase:50/60 Hz – 45 W Weight:9.4 kg Dimensions:H x L x P = 250 x 250 x 60 mm

On the basis of its well proven concept of production line QC Testers, ATEQ has developed a new leak tester designed for the specific requirements of high volume production of plastic parts. This instrument is used for the detection of localized moulding faults, insufficient membrane thickness, perforations, etc. This instrument has also proven to be effective on testing pouch battery cells. The IONIQ is based on discharge current measurement and is able to detect defects up to of 10µm. Battery pouch cells, plastic bottle caps, plastic packaging, plastic coverings The IONIQ measures the current flowing between a patented charged probe and a ground plate placed under the part to be tested. The IONIQ uses the % of the nominal voltage (which reflects the discharge current), measured on the part as PASS/FAIL level. In a PASS situation (fig 1) : No hole, no weak part, the IONIQ measures a high %. The measured voltage and the nominal voltage are virtually equal. Operating:+ 10°C at + 45°C Storage:0°C at + 60°C Dimensions:H x L x P = 136 x 250 x 255 mm Weight:8 kg

Bond Tester - Aeronautics testing

The H5800, a newcomer in the ATEQ range of leak detectors, is one of the finest tracer gas and hydrogen leak detectors on the market today. Works well for parts that are hot, flexible or have testing specifications that are too small to test with air. The most cost effective solution when you want to identify leaks in gr/year or ppm . The H5800 is equipped with a touchscreen interface and features for easy integration. Automotive: Leak localization, cooling systems, alloy wheel, weld, diecast… Medical: Rubber diaphragm… Domestic Appliances: compressor Digital pressure surve Generated Suction Flow control Vacuum pre test (gross leak) Detection of leaking gas traces – Range: 5~ 100 ppm 32 programs 7 inputs/ 5 outputs Automatic measurement cycle Operating:+ 10°C to + 45°C Storage:0°C to + 60°C

The F28 LPV or vacuum decay instrument is the latest addition to ATEQ’s new range: F28. It’s a high peformance, low cost, quality leak tester. Its small packaging enables to mount it near the test part insuring the best measurement conditions. You can easily program and supervise it our super friendly interface : F28 Control. Packaging, blister, watch, mobilephone, pneumatic and hydraulic fittings Pressure decay leak measurement: vacuum Water leak detection by evaporation under strong vacuum Smart pressure regulation without regulator – auto fill (optional) Electronic regulation (optional) Units: Pa, Pa/s, sccm, μg/min of H2O Compact dimensions (overall (mm): h 141.5 x L 225 x D 97) Integrated fill and dump valves Ethernet network up to 50 modules (Modbus IP) DIN rail mounting Environment : ROHS standard Weight :around 3.5 Kg Voltage:24 V DC / 1.6 A Operating:+ 5°C at + 45°C Storage:0°C at + 60°C

Ideal for rework stations on EV vehicle production lines, the EVB 5100 Battery Module Balancing Machine uses the most efficient technologies to equalize voltage differences between modules. Its wide operating range and customization capabilities makes the EVB 5100 compatible with all EV/HEV batteries on the market. Battery balancing (charging, discharging) and temperature monitoring for EV/HEV modules Wide balancing range: In charge 60V-50A/150V-20A in discharge max 3000W Easily configurable target values, voltage and current thresholds Cloud-based platform for data collection, real-time monitoring and reporting Monitoring connectors perform voltage/temperature surveillance of each internal cell Integrated module database for easy reference selection Automated security checks for fully secure operation and shut down in case of anomaly Futureproof: exchangeable power charger modules and connectors Worldwide support through ATEQ subsidiaries and local agents in 37 countries Weight:145Kg Dimensions:(WxHxD) 310x1051x695 mm Voltage:100 – 240 V, 50/ 60 Hz Consumption:2kW Max. Operating:0°C to 40°C